In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks which you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the house, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but it is really very simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so you get something which resembles a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.

Then you’ll need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak when you place the mask on. Make sure that the edges are cut so that the edges aren’t sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is url best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you are done, so that you don’t wind up with smudges or smears on your dog.

Then it’s time to paste the mask on your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Make sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged securely onto the surface of your dog. Don’t make the folds too big or else it could look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain the ears are level and make certain it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask because your pet security, you will need to do some sanding to make certain it’s secure on your dog. You can do this by sanding off any excess paper which might have been eliminated from your mask.